Linux version 2.6.7-1.494.2.2custom (root@sneguljcica.pingo.org) (gcc version 3.3.3 20040412 (Red Hat Linux 3.3.3-7)) #1 Sat Sep 25 14:57:31 CEST 2004 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f800 (usable) BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000ce000 - 00000000000d0000 (reserved) BIOS-e820: 00000000000d8000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000000f6e0000 (usable) BIOS-e820: 000000000f6e0000 - 000000000f6eb000 (ACPI data) BIOS-e820: 000000000f6eb000 - 000000000f700000 (ACPI NVS) BIOS-e820: 000000000f700000 - 0000000010000000 (reserved) BIOS-e820: 00000000fec10000 - 00000000fec20000 (reserved) BIOS-e820: 00000000ff800000 - 00000000ffc00000 (reserved) BIOS-e820: 00000000fffffc00 - 0000000100000000 (reserved) 0MB HIGHMEM available. 246MB LOWMEM available. zapping low mappings. On node 0 totalpages: 63200 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 59104 pages, LIFO batch:14 HighMem zone: 0 pages, LIFO batch:1 DMI present. ACPI: RSDP (v000 PTLTD ) @ 0x000f64f0 ACPI: RSDT (v001 PTLTD Montara 0x06040000 LTP 0x00000000) @ 0x0f6e6530 ACPI: FADT (v001 INTEL MONTARAG 0x06040000 PTL 0x00000050) @ 0x0f6eaed2 ACPI: BOOT (v001 PTLTD $SBFTBL$ 0x06040000 LTP 0x00000001) @ 0x0f6eafd8 ACPI: SSDT (v001 INTEL GV3Ref 0x00001001 MSFT 0x0100000e) @ 0x0f6e6560 ACPI: DSDT (v001 WISTRO FB2I 0x06040000 MSFT 0x0100000e) @ 0x00000000 ACPI: PM-Timer IO Port: 0x1008 Built 1 zonelists Kernel command line: ro root=LABEL=/ rhgb quiet mapped 4G/4G trampoline to ffff3000. Initializing CPU#0 CPU 0 irqstacks, hard=023c2000 soft=023c1000 PID hash table entries: 1024 (order 10: 8192 bytes) Detected 1618.588 MHz processor. Using tsc for high-res timesource Console: colour VGA+ 80x25 Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) Memory: 246520k/252800k available (2004k kernel code, 5564k reserved, 651k data, 140k init, 0k highmem) Calibrating delay loop... 3162.11 BogoMIPS Security Scaffold v1.0.0 initialized SELinux: Initializing. SELinux: Starting in permissive mode There is already a security framework initialized, register_security failed. selinux_register_security: Registering secondary module capability Capability LSM initialized as secondary Mount-cache hash table entries: 512 (order: 0, 4096 bytes) CPU: After generic identify, caps: afe9f9bf 00000000 00000000 00000000 CPU: After vendor identify, caps: afe9f9bf 00000000 00000000 00000000 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: After all inits, caps: afe9f1bf 00000000 00000000 00000040 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: Intel(R) Pentium(R) M processor 1.60GHz stepping 06 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. checking if image is initramfs...it isn't (no cpio magic); looks like an initrd Freeing initrd memory: 192k freed NET: Registered protocol family 16 PCI: PCI BIOS revision 2.10 entry at 0xfd6c4, last bus=3 PCI: Using configuration type 1 mtrr: v2.0 (20020519) ACPI: Subsystem revision 20040326 ACPI: IRQ9 SCI: Edge set to Level Trigger. ACPI: Interpreter enabled ACPI: Using PIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (00:00) PCI: Probing PCI hardware (bus 00) PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1 PCI: Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 10 *11) ACPI: PCI Interrupt Link [LNKB] (IRQs *10 11) ACPI: PCI Interrupt Link [LNKC] (IRQs 10 *11) ACPI: PCI Interrupt Link [LNKD] (IRQs *11) ACPI: PCI Interrupt Link [LNKE] (IRQs *10 11) ACPI: PCI Interrupt Link [LNKF] (IRQs *10 11) ACPI: PCI Interrupt Link [LNKG] (IRQs *10 11) ACPI: PCI Interrupt Link [LNKH] (IRQs 10 *11) ACPI: Embedded Controller [EC] (gpe 28) Linux Plug and Play Support v0.97 (c) Adam Belay usbcore: registered new driver usbfs usbcore: registered new driver hub PCI: Using ACPI for IRQ routing ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11 ACPI: PCI interrupt 0000:00:02.0[A] -> GSI 11 (level, low) -> IRQ 11 ACPI: PCI interrupt 0000:00:1d.0[A] -> GSI 11 (level, low) -> IRQ 11 ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11 ACPI: PCI interrupt 0000:00:1d.1[B] -> GSI 11 (level, low) -> IRQ 11 ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11 ACPI: PCI interrupt 0000:00:1d.2[C] -> GSI 11 (level, low) -> IRQ 11 ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 11 ACPI: PCI interrupt 0000:00:1d.7[D] -> GSI 11 (level, low) -> IRQ 11 ACPI: PCI interrupt 0000:00:1f.1[A] -> GSI 11 (level, low) -> IRQ 11 ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10 ACPI: PCI interrupt 0000:00:1f.3[B] -> GSI 10 (level, low) -> IRQ 10 ACPI: PCI interrupt 0000:00:1f.5[B] -> GSI 10 (level, low) -> IRQ 10 ACPI: PCI interrupt 0000:00:1f.6[B] -> GSI 10 (level, low) -> IRQ 10 ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 10 ACPI: PCI interrupt 0000:02:03.0[A] -> GSI 10 (level, low) -> IRQ 10 ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 10 ACPI: PCI interrupt 0000:02:05.0[A] -> GSI 10 (level, low) -> IRQ 10 ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 10 ACPI: PCI interrupt 0000:02:06.0[A] -> GSI 10 (level, low) -> IRQ 10 ACPI: PCI interrupt 0000:02:09.0[A] -> GSI 10 (level, low) -> IRQ 10 TC classifier action (bugs to netdev@oss.sgi.com cc hadi@cyberus.ca) vesafb: probe of vesafb0 failed with error -6 Simple Boot Flag at 0x36 set to 0x1 apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac) apm: overridden by ACPI. audit: initializing netlink socket (disabled) audit(1097004123.481:0): initialized Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) SELinux: Registering netfilter hooks Initializing Cryptographic API ksign: Installing public key data Loading keyring - Added public key B2E9E89CBA6B26AA - User ID: Red Hat, Inc. (Kernel Module GPG key) ksign: invalid packet (ctb=00) Unable to load default keyring: error=74 pci_hotplug: PCI Hot Plug PCI Core version: 0.5 ACPI: Processor [CPU0] (supports C1 C2 C3, 8 throttling states) ACPI: Thermal Zone [THRS] (40 C) ACPI: Thermal Zone [THRC] (46 C) isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Real Time Clock Driver v1.12 Linux agpgart interface v0.100 (c) Dave Jones agpgart: Detected an Intel 855 Chipset. agpgart: Maximum main memory to use for agp memory: 195M agpgart: Detected 8060K stolen memory. agpgart: AGP aperture is 128M @ 0xe8000000 Serial: 8250/16550 driver $Revision: 1.1 $ 8 ports, IRQ sharing enabled ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A ACPI: PCI interrupt 0000:00:1f.6[B] -> GSI 10 (level, low) -> IRQ 10 RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize divert: not allocating divert_blk for non-ethernet device lo Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ICH4: IDE controller at PCI slot 0000:00:1f.1 PCI: Enabling device 0000:00:1f.1 (0005 -> 0007) ACPI: PCI interrupt 0000:00:1f.1[A] -> GSI 11 (level, low) -> IRQ 11 ICH4: chipset revision 3 ICH4: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x1810-0x1817, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0x1818-0x181f, BIOS settings: hdc:DMA, hdd:pio hda: ST94019A, ATA DISK drive Using cfq io scheduler ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 hdc: HL-DT-STCD-RW/DVD DRIVE GCC-4241N, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 hda: max request size: 1024KiB hda: 78140160 sectors (40007 MB) w/2048KiB Cache, CHS=16383/255/63, UDMA(100) hda: hda1 hda2 hda3 hdc: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 ide-floppy driver 0.99.newide usbcore: registered new driver hiddev usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.0:USB HID core driver mice: PS/2 mouse device common for all mice i8042.c: Detected active multiplexing controller, rev 1.9. serio: i8042 AUX0 port at 0x60,0x64 irq 12 serio: i8042 AUX1 port at 0x60,0x64 irq 12 serio: i8042 AUX2 port at 0x60,0x64 irq 12 serio: i8042 AUX3 port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 input: AT Translated Set 2 keyboard on isa0060/serio0 md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 NET: Registered protocol family 2 IP: routing cache hash table of 512 buckets, 16Kbytes TCP: Hash tables configured (established 16384 bind 4681) Initializing IPsec netlink socket NET: Registered protocol family 1 NET: Registered protocol family 17 speedstep-centrino: found unsupported CPU with Enhanced SpeedStep: send /proc/cpuinfo to Jeremy Fitzhardinge ACPI: (supports S0 S3 S4 S5) md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. RAMDISK: Compressed image found at block 0 VFS: Mounted root (ext2 filesystem). kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. Freeing unused kernel memory: 140k freed SELinux: Disabled at runtime. SELinux: Unregistering netfilter hooks Synaptics Touchpad, model: 1 Firmware: 13.8 180 degree mounted touchpad Sensor: 18 new absolute packet format Touchpad has extended capability bits -> 4 multi-buttons, i.e. besides standard buttons -> multifinger detection -> palm detection input: SynPS/2 Synaptics TouchPad on isa0060/serio4 NET: Registered protocol family 10 Disabled Privacy Extensions on device 0235a140(lo) IPv6 over IPv4 tunneling driver divert: not allocating divert_blk for non-ethernet device sit0 [drm] Initialized i830 1.3.2 20021108 on minor 0: [drm] Initialized i830 1.3.2 20021108 on minor 1: mtrr: base(0xe8020000) is not aligned on a size(0x300000) boundary ACPI: AC Adapter [AC] (on-line) ACPI: Battery Slot [BAT0] (battery present) ACPI: Power Button (FF) [PWRF] ACPI: Lid Switch [LID] ACPI: Sleep Button (CM) [SLP2] ACPI: PCI interrupt 0000:00:1d.7[D] -> GSI 11 (level, low) -> IRQ 11 ehci_hcd 0000:00:1d.7: EHCI Host Controller PCI: Setting latency timer of device 0000:00:1d.7 to 64 ehci_hcd 0000:00:1d.7: irq 11, pci mem 123bb000 ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 PCI: cache line size of 32 is not supported by device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: USB 2.0 enabled, EHCI 1.00, driver 2004-May-10 hub 1-0:1.0: USB hub found hub 1-0:1.0: 6 ports detected USB Universal Host Controller Interface driver v2.2 ACPI: PCI interrupt 0000:00:1d.0[A] -> GSI 11 (level, low) -> IRQ 11 uhci_hcd 0000:00:1d.0: UHCI Host Controller PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: irq 11, io base 00001820 uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ACPI: PCI interrupt 0000:00:1d.1[B] -> GSI 11 (level, low) -> IRQ 11 uhci_hcd 0000:00:1d.1: UHCI Host Controller PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci_hcd 0000:00:1d.1: irq 11, io base 00001840 uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ACPI: PCI interrupt 0000:00:1d.2[C] -> GSI 11 (level, low) -> IRQ 11 uhci_hcd 0000:00:1d.2: UHCI Host Controller PCI: Setting latency timer of device 0000:00:1d.2 to 64 uhci_hcd 0000:00:1d.2: irq 11, io base 00001860 uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected usb 3-1: new low speed USB device using address 2 input: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:1d.1-1 EXT3 FS on hda2, internal journal device-mapper: 4.1.0-ioctl (2003-12-10) initialised: dm@uk.sistina.com cdrom: open failed. Adding 1020116k swap on /dev/hda3. Priority:-1 extents:1 NTFS driver 2.1.15 [Flags: R/O MODULE]. NTFS volume version 3.1. ohci1394: $Rev: 1223 $ Ben Collins ACPI: PCI interrupt 0000:02:03.0[A] -> GSI 10 (level, low) -> IRQ 10 ohci1394: fw-host0: Unexpected PCI resource length of 1000! ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[10] MMIO=[e0202000-e02027ff] Max Packet=[2048] IA-32 Microcode Update Driver: v1.14 microcode: No new microdata for cpu 0 ieee1394: Host added: ID:BUS[0-00:1023] GUID[04e40a0012002034] parport0: PC-style at 0x378 [PCSPP,TRISTATE] SCSI subsystem initialized inserting floppy driver for 2.6.7-1.494.2.2custom floppy0: no floppy controllers found b44.c:v0.94 (May 4, 2004) ACPI: PCI interrupt 0000:02:05.0[A] -> GSI 10 (level, low) -> IRQ 10 divert: allocating divert_blk for eth0 eth0: Broadcom 4400 10/100BaseT Ethernet 00:0a:e4:27:e0:5b ieee80211_crypt: registered algorithm 'NULL' ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 0.11 ipw2200: Copyright(c) 2003-2004 Intel Corporation ACPI: PCI interrupt 0000:02:06.0[A] -> GSI 10 (level, low) -> IRQ 10 ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection divert: allocating divert_blk for eth1 ipw2200: Radio Frequency Kill Switch is On: Kill switch must be turned off for wireless networking to work. divert: freeing divert_blk for eth0 divert: freeing divert_blk for eth1 ieee80211_crypt: unregistered algorithm 'NULL' (deinit) ip_tables: (C) 2000-2002 Netfilter core team b44.c:v0.94 (May 4, 2004) ACPI: PCI interrupt 0000:02:05.0[A] -> GSI 10 (level, low) -> IRQ 10 divert: allocating divert_blk for eth0 eth0: Broadcom 4400 10/100BaseT Ethernet 00:0a:e4:27:e0:5b ip_tables: (C) 2000-2002 Netfilter core team b44: eth0: Link is down. eth0: no IPv6 routers present Linux Kernel Card Services options: [pci] [cardbus] [pm] ACPI: PCI interrupt 0000:02:09.0[A] -> GSI 10 (level, low) -> IRQ 10 Yenta: CardBus bridge found at 0000:02:09.0 [1734:1033] Yenta: Using CSCINT to route CSC interrupts to PCI Yenta: Routing CardBus interrupts to PCI Yenta TI: socket 0000:02:09.0, mfunc 0x01001002, devctl 0x64 Yenta: ISA IRQ mask 0x0098, PCI irq 10 Socket status: 30000007 cs: IO port probe 0x0c00-0x0cff: clean. cs: IO port probe 0x0100-0x04ff: excluding 0x378-0x37f 0x4d0-0x4d7 cs: IO port probe 0x0a00-0x0aff: clean. parport0: PC-style at 0x378 [PCSPP,TRISTATE] lp0: using parport0 (polling). lp0: console ready Acer Travelmate hotkey driver v0.5.16 Debug: sleeping function called from invalid context at include/asm/semaphore.h:119 in_atomic():0[expected: 0], irqs_disabled():1 [<0211c651>] __might_sleep+0x82/0x8c [<021394cb>] sys_init_module+0x28d/0x2e5 NET: Registered protocol family 23 nsc-ircc, Found chip at base=0x02e nsc-ircc, driver loaded (Dag Brattli) divert: not allocating divert_blk for non-ethernet device irda0 IrDA: Registered device irda0 nsc-ircc, Using dongle: IBM31T1100 or Temic TFDS6000/TFDS6500 IrCOMM protocol (Dag Brattli) divert: not allocating divert_blk for non-ethernet device irda1 mtrr: base(0xe8020000) is not aligned on a size(0x300000) boundary ACPI: PCI interrupt 0000:00:1f.5[B] -> GSI 10 (level, low) -> IRQ 10 PCI: Setting latency timer of device 0000:00:1f.5 to 64 intel8x0_measure_ac97_clock: measured 49417 usecs intel8x0: clocking to 48000